Made Sistemi
italiano

microPrinter
Dot impact printer for microREC system
 

The microPRINTER was developed to make easier the printing function of the data stored in the microREC sensor. By an adapter it is possible to download all the data recorded inside it in fews seconds and to start the printout automatically from the last acquired data (the newer).

The strong contruction of the box (alluminium with details in inox) are some characteristics of a product born to be used for heavy duty also.

The battery charger for the batteries (included in the printer) and a confortable strap are the supplied accessories together to the product.

When the batteries are completly charged, the printer allow until one hour of continuos printing, while to reduce the power consumption of the printer, it was applied an automatic power off after 10 sec. stopping.

The motherboard drives an Epson dot impact mechanism with 24 columns (TBP624) or 42 (TBP642). Control system for absence or feed paper fault.

Automatic paper feed (with power on printer)

Characteristics (programmables by internal dip switch) of the printer are:

- Availability of a small FONT to reduce the consumption of 30 % respect to the traditional models.

- Printout in Graphical Mode.

 

At least it is present an "autodiagnostic" system and a "fault" led in front of the device to decode the anomaly.

Only for microSensor DS1921/L/G/H/Z

 

Thecnical characteristics
mod.
microPRINTER24
microPRINTER42
Type of mechanism
dot impact mechanism
no. columns :
24
42
Speed of printing:
1.8 lines/sec
1.2 lines/sec
Paper width
57 mm
Paper diameter :
50 mm
Supply:
Battery powered
Autonomy:
1 hour
Current on charge:
75 mA constant (max 15 hours)
Ink ribbon :
Purple o black EPSON ERC-09 (o ERC-22)
Paper :
Cellulose paper W 57.5mm single or double copy
Matrix charact. Normal:
6 x 10 dot
Matrix charact.. Optimized:
6 x 7 dot
Dot each line :
144
252
Dot dimensions :
0.33 x 0.37 mm
0.19 x 0.38 mm
Printing options :
Optimized
paper reduction (-30%)
NO
input interface :
1Wire
Ratnge of temperature use :
10 - 50 °C
Range of humidity use :
10 % - 85%
Dimensions
W150 L125 D64 mm