Made Sistemi

TBP600

Dot impact printer with serial input RS232
 

The TBP600 printer line is mechanically and electronically planned for heavy duty (es: automotive).

The case is made of alluminium with a stainless cutter and the cover has two "security" screews.

The motherboard drives an Epson dot impact mechanism with 24 columns (TBP624) or 42 (TBP642). Control system for absence or feed paper fault.

Characteristics (programmables by internal dip switch) of "mod. P" printer are:

- Power on-off by RTS line for energy saving.

- Auto power-off after 25 secs. Stand-by of only 15 uA (@ 13.8V).

- Automatic paper loading

- Availability of a small FONT to reduce the paper consumption of 30 % respect to the traditional models (only TBP624).

On each model of TBP600 series is present an "autodiagnostic" system and a "fault" led in front of the device. It is moreover possible to supply the printer through the pin 9 of the DB9 connector.

Characteristics of "mod. B" printer are:

- Powered rechargeable batteries printer.

- Power on-off by RTS line for energy saving.

- Total auto power-off after 10 secs.

- Automatic paper loading

- Availability of a small FONT to reduce the paper consumption of 30 % respect to the traditional models.

 

On each model of TBP600 series is present an "autodiagnostic" system and a "fault" led in front of the device.

 

Thecnical characteristics
mod.
TBP624/P
TBP624/B
TBP642/P
Type of printout
Dot impact mechanism
no. columns
24
42
Velocità di stampa:
1.8 lines/sec
1.2 lines/sec
Paper width :
57 mm
Paper diameter:
50 mm
Supply
10/30 Vdc
Rechargeable battery
10/30 Vdc
Average absorbed current:
0.9 A (12Vdc)
0.9 A (12Vdc)
Averege on wait:
30 mA
30 mA
Average on Stand-by:
15 uA
15 uA
Peak absorbed current:
3 A
3 A
Printing autonomy
1 hour
Absorbed current on charge
75 mA constant (max 15 hours)
Ink ribbon :
Puple or black EPSON ERC-09 (o ERC-22)
Support of printout
cellulose paper L. 57 mm with single or double copy
Supply connector
2 Way (3.5mm)
Characters matrix
Normal: 6 x 10 dot
Compress characters matriz
6 x 7 dot
NO
Dot for line
144
252
Graphic dot
0.33 x 0.37 mm

0.19 x 0.38

Type of printout
Right / Reverse/Negative/Double H/Doppia L /Doppia H+L
Characters set :
ASCII Ridotto in stampa Negativo / ASCII Esteso tutti gli altri
Printing options
Normale o Compressacon riduz. consumo carta (-30%)
NO
Printer buffer
128 byte
Input interface
RS232 a 1200/2400/4800/9600 Baud 8N1 (Default 1200/8/N/1)
Range of use
0 - 50 °C
Relative humidity
10 % - 85%
Dimensions
L150 H125 P64 mm