SMS management

The BT01MD module allows to the thermorecorder REC96-2005/8, REC96-T3(all the versions) to send alarms through Bluetooth connection.

The services are the followings:

1) Send, in real time, of all the informations shown on the display of the thermorecorder.
2) Kind of alarm:

a) Thermostat: acoustic alarm when the temperature is out from thermostat threshold (upper or lower)

b) Fault: acoustin alarm when the connection is interrupted from more than 10 sec.
3) Reconnections: when disconnectted, before to shunt down it try 6 times the connection with an intervall of 30 secs.

Data download from GSM01MD

The BT01MD module allow to download in a faster and automatic way the data stored in the thermorecorder which it is connected and to get it always possible everywhere there is Bluetooth network.

The module can be used in 2 way:

1) If you need only an acoustic alarm for "out thermostat threshold" and for "generic fault" it is enought to install the Tooth 96 application on a PDA or smartphone (Android, IOS and Windows phone)

2) Data download of the thermorecorder memory to PC: The time for the operation is about 3 mins. and at the end will be possible to save the data in the database of the application Store96.

Economic statement

Here it's show an example of economic statement who highlight the cost that a company .... in term of time to do the operation of data download in traditional mode (through the direct connection beetwen PC and thermorecorder).
N.B.: The table, like showed, is calcolated ona a time of a "month".

This table is compilated with the following conditions:

Cost of the user: 20 € / hour

Monthly time spent form the user = about 10 min. for each download of each thermorecorder.

Like you can see from the table the depreciation of the system depends from the frequency of use and not from the number of devices used.